Diamond 360 Residential Maintenance Plan
Spring Cooling Tune Up
Test
- Suction pressure and temperature
- Discharge pressure and temperature
- All safety controls
- All motor windings
- Operation and condition of compressor
- Crankcase heater operation
- Thermostat operation
- All capacitors for bulges, rust, and leaks
Inspect
- Blower motor
- Condenser fan motor
- Inspect all wiring connections
- Evaporator coil
- Disconnect box at outdoor unit
- Condensate drain and blow out as needed
- Condensate pump
- Condenser coil
- Blower wheel, if applicable
- Duct work cleanliness and sizing
- Water rinse condenser coil
- Changeout filter provided by customer
Check
- Temperature difference between return and supply air
- Blower motor belt if applicable, adjust as needed
- Blower speed, adjusting as needed
- Voltage and amperage of all motors
Fall Heating Tune Up
Test
- Carbon monoxide levels
- Thermostat operation
- Ignition system
- Safety and operating controls
- Wiring connections
- Temperature rise between return and supply air
- All motor windings
Inspect
- Gas valve
- Motor bearings and lubricate
- Flue pipe and heat exchanger
- Duct work cleanliness and sizing
- Changeout filter provided by customer
- Blower motor
Clean
- Burners
- Flue pipe
- Drainage system
- Pilot assembly
- Standard filter if washable
- Combustion chamber
Platinum Benefits
10% Discount on Repairs Priority Service as Requested
